• HOME
  • ABOUT US
  • PRODUCTS
    • Acrylic seamless joint adhesive
      • Solid surface adhesive
      • Sintered stone adhesive
      • Quartz stone adhesive
    • Structural adhesive
      • MMA structural adhesive
      • Epoxy structural adhesive 2023
    • Acrylic adhesives
      • Acrylic 30
      • Acrylic 120
      • Acrylic 240
      • Acrylic 240F
      • Acrylic 242 (Lamination)
    • Plastic Pipe Cement
      • PVC pipe cement
      • C-PVC pipe cement
      • ABS pipe cement
      • Primer
      • Cleaner
    • Accessory
      • Mixing Tip (Nozzle)
      • Dispensing Gun
      • Sink Clip
      • Mitre clamp
  • RESOURCES
  • CULTURE
  • CONTACT
  • HOME
  • ABOUT US
  • PRODUCTS
    • Acrylic seamless joint adhesive
      • Solid surface adhesive
      • Sintered stone adhesive
      • Quartz stone adhesive
    • Structural adhesive
      • MMA structural adhesive
      • Epoxy structural adhesive 2023
    • Acrylic adhesives
      • Acrylic 30
      • Acrylic 120
      • Acrylic 240
      • Acrylic 240F
      • Acrylic 242 (Lamination)
    • Plastic Pipe Cement
      • PVC pipe cement
      • C-PVC pipe cement
      • ABS pipe cement
      • Primer
      • Cleaner
    • Accessory
      • Mixing Tip (Nozzle)
      • Dispensing Gun
      • Sink Clip
      • Mitre clamp
  • RESOURCES
  • CULTURE
  • CONTACT
ꄴPrevious： null
ꄲNext： null

Sintered stone adhesive

 

General Description

Uvalam Sintered Stone Adhesive (AS-14), is a two parts (10:1), room temperature curing, color matched, the new third generation of methyl methacrylate adhesive.

 

It is formulated with the advanced technology for the surfacing industry with perfect deck seam and mitre seam on sintered stone, and offers excellent structural bond with excellent strength, flexibility and durability.  

 

Performance benefits

● Fast/steady curing under room temperature  

● Excellent water resistance

● Good weatherability and anti-UV;           

● Excellent scuff resistance

● Minimum surface preparation              

● Excellent impact resistance

● Comfortable sandability                   

● Structural bonding strength

● Heat and cool stability                    

● Good toughness and flexibility

 

Adhesive Characteristics

Color

Part A (adhesive) – Multiple

Part B (Hardener) –Clear to off-white

Mix Ratio by Volume (ml)

A:B = 10:1

Viscosity

Part-A (Adhesive): 30,000 - 45,000 CPS/22℃

Part-B (Hardener): 15,000 -20,000 CPS/22℃

Max. gap filling

3mm

Operating Temperature

Max 230℉(110℃)

Mixed Adhesive Gravity

1.10-1.15

Tensile Strength psi (MPa)

5,000 – 7,200 (34 – 50)

Flexural Strength psi (MPa)

4,000 – 5,200 (28 – 36)

Butt Joint Tensile psi (MPa)

2,000 – 2,500 (14 – 17)

 

Cartridge size: 

1/ Dual side-by-side 10:1 cartridge 50ml

2/ Dual side-by-side 10:1 cartridge 75ml

3/ Dual side-by-side 10:1 cartridge 250ml

 

Working Time

The working time is provided as an estimate of the time between mixing and curing of the adhesive, and it depend on the bonding conditions, that the adhesive remains fluid and bondable.

 

The working time is affected by the mixing ratio, air temperature, adhesive temperature and the substrate temperature as well as the shelf time of the adhesive.

 

The best environment to use Uvalam adhesive is at the temperature between 15℃ to 30 ℃, and the working time is 7-8 minutes under temperature around 25 ℃.

 

Curing Time

10-11 minutes under temperature around 25 ℃.

 

Shelf life

The Shelf time for our adhesive usually is 24 months under storage condition with temperature from 10℃ to 24℃ and dry places to avoid direct sunshine.

 

Please contact us for the TDS and MSDS for more information on sintered stone adhesive. 

SSAC5075250
넳 넲